IP40X Compact Linear Actuator | OEM Configuration

IP40X Compact Linear Actuator | OEM Configuration

IP40X is a configurable compact linear-actuator platform for OEM equipment. Confirm load, stroke, speed, electrical, control, environmental and documentation requirements for the selected configuration before sample or bulk approval.

Contactez-nous pour obtenir un devis et des informations sur ce produit :

En général, nous vous contacterons dans les 30 minutes
Partagez votre amour

IP40X compact linear actuator for OEM equipment

IP40X is a configurable compact linear-actuator platform for OEM equipment and space-constrained motion systems. The product is currently cataloged in ActuLift’s 24V actuator range, while final electrical suitability depends on the selected build, controller and power architecture.

For family comparison, review ActuLift micro et mini actionneurs linéaires, actionneurs linéaires 24V et actionneurs linéaires 12V before locking the design.

Configuration data to confirm before quotation

  • Required supply voltage and electrical limits.
  • Required push and pull load in the real mechanism.
  • Required stroke, retracted length and extended length.
  • Required movement speed under the expected load.
  • Available installation envelope and mounting geometry.
  • Expected operating frequency and duty cycle.
  • Feedback, limit or position-signal requirements.
  • Controller, cable, connector and wiring requirements.
  • Required environmental or ingress-protection level.
  • Required drawings, test records and compliance documentation.

Load and compact mechanical integration

Actuator capacity should be confirmed from the complete mechanism rather than inferred from a generic headline value. Provide the moving load, installation angle, leverage, friction, side-load risk, shock loads and required safety margin before selecting the final IP40X configuration.

Because compact installations often leave little tolerance for misalignment, confirm pin locations, bracket spacing and the complete load path during drawing review. Related hardware can be reviewed under Solutions OEM/ODM sur mesure.

Stroke and movement-speed selection

Required stroke and movement speed should be specified for the exact application and validated under the real working load. Different gearing, loads and travel requirements can change movement time, current draw and practical performance.

Before quotation, provide the required stroke, installation dimensions and motion-time target. Sample validation should check full travel, end-of-stroke behavior, current draw, vibration and mechanical interference.

Electrical, feedback and controller matching

The current catalog places IP40X in ActuLift’s 24V range, but the complete electrical design still needs configuration-specific confirmation. Confirm supply limits, rated and peak current, switching method, cable length, connector capacity and controller interface for the selected build.

If the project requires feedback, limit confirmation, synchronization or position control, confirm the exact sensor and signal arrangement before approval rather than assuming a specific controller, driver or bracket compatibility from the model family. Related options can be reviewed under control boxes and controllers.

Environmental and protection requirements

Environmental suitability depends on the exact actuator build, seals, cable exits, connectors, mounting direction and surrounding equipment. If the project requires a specific ingress-protection level, cleaning method, temperature range, humidity limit or outdoor exposure condition, request the current supporting test basis or documentation for the ordered configuration.

Noise, duty-cycle and lifecycle validation

For equipment used near people, define an acceptable sound target and test the actuator inside the finished mechanism. Mounting, structure, load, gearing and enclosure design can materially change the sound of the complete system.

Duty cycle and service-life requirements should be matched to the actual ON/OFF pattern, load and ambient conditions. Request applicable validation data if the project has defined lifecycle or repeated-operation requirements.

Application and system fit

IP40X can be evaluated for compact automation, furniture mechanisms, fixtures and other space-constrained OEM systems, but application fit should be confirmed from the complete mechanical, electrical and control design rather than from a generic industry label.

If the load case is materially heavier or the mechanism has shock or side-load concerns, compare the project with ActuLift actionneurs linéaires lourds before freezing the actuator family.

Compliance and documentation

For export programs, regulated equipment or customer quality systems, request the documentation package for the exact IP40X configuration. Depending on the project, this may include drawings, product specifications, wiring information, inspection records, material information, environmental test evidence or available compliance declarations.

Do not treat generic page wording as proof that named compliance or quality-system credentials apply unchanged to every configuration or to the buyer’s finished machine.

OEM buyer checklist

  • Confirm the exact IP40X configuration before sample approval.
  • Confirm load, stroke, speed and installation envelope from the real mechanism.
  • Confirm supply, current, wiring, connectors and controller compatibility.
  • Confirm feedback or position-signal requirements where applicable.
  • Confirm environmental/protection requirements with supporting documentation.
  • Confirm duty-cycle and lifecycle requirements from the actual use case.
  • Confirm the documentation package required before bulk approval.

Where IP40X fits

IP40X is best treated as a configurable compact linear-actuator platform for OEM motion systems rather than a fixed universal specification. Use the product page to begin sourcing, then lock the exact electrical, mechanical, environmental and documentation requirements through drawings, samples and project-specific validation.

Personnalisation OEM et de marque privée

ActuLift prend en charge la personnalisation de bout en bout, de la conception structurelle et des paramètres de course aux finitions de marque et de boîtier, vous aidant à construire une identité de marque puissante.

Réponse rapide et prototypage

Nous comprenons l'importance de la rapidité dans l'approvisionnement B2B, en utilisant des flux de production optimisés pour garantir des réponses efficaces du développement d'échantillons à la livraison en gros.

Quality Documentation & Traceability

Quality and traceability requirements vary by project. Ask ActuLift for the applicable inspection records, product specifications, drawings and available compliance documentation for the selected model and order.