H-Type Linear Actuator Bracket | OEM Mounting Accessory

H-Type Linear Actuator Bracket | OEM Mounting Accessory

ال قوس تشغيل خطي من النوع H is a mechanical pivot-mount accessory for OEM actuator assemblies. Compatibility is determined by the exact actuator interface, pin and hole dimensions, bracket geometry, fasteners, load path, mounting surface and full-motion clearance.

Confirm the selected actuator drawing, bracket material/finish, allowable assembly load, supplied pin or retention method, environmental requirements and applicable documents before sample approval or bulk ordering.

اتصل بنا للحصول على عرض سعر ومعلومات حول هذا المنتج:

عادةً ما سنتواصل معك خلال 30 دقيقة
شارك

حامل مشغل خطي من النوع H للاستخدامات الشاقة

The H-Type Linear Actuator Bracket is a mechanical mounting accessory for actuator assemblies that use a pivot-style connection. The current product brief references IP1200, IP800 and IP3000 series applications and a 5000N static-load figure. Treat those as procurement references only: confirm the exact actuator model, bracket drawing, pin/hole geometry, material, fasteners, load direction and allowable bracket load before sample approval.

بالنسبة للمشتري من OEM، القيمة واضحة: المشغل جيد فقط بقدر ما يتم تركيبه. اختيار حامل غير مناسب يمكن أن يغير مسار التحميل، ويضيف ضغط جانبي، أو يجعل أعمال الصيانة أصعب مما يجب. يوفر هذا الحامل من النوع H فرق عمل المعدات ملحق تركيب محدد لدمج المحرك الخطي، خاصة حيث تكون الحاجة إلى مقعد تركيب المشغل الدوار.

Potential uses include OEM actuator assemblies that require a pivot-mount interface. Application suitability depends on the actual actuator, bracket geometry, frame material, load direction, side-load control, fasteners, clearance and any industry-specific requirements of the finished equipment. If your project also needs matching actuators, start with ActuLift’s مشغلات خطية عالية الأداء أو الفئات الأوسع مشغل خطي 12 فولت و محرك خطي 24 فولت زر.

مواصفات المنتج

المواصفاتتفاصيل
اسم المنتجقوس تشغيل خطي من النوع H
التركيب الماديConfirm material grade, thickness and surface treatment on the selected bracket drawing or quotation.
الحد الأقصى لسعة الحملCurrent brief lists 5000N static; confirm allowable bracket/assembly load for the actual geometry, fasteners, force direction and mounting surface.
التوافقCurrent brief references IP1200, IP800 and IP3000 series; confirm the exact actuator interface, pin/hole dimensions and clearance.
نوع التركيبمقعد تثبيت مشغل دوار من النوع H
معالجة السطحConfirm available surface treatment/coating options for the selected order.
آلية التركيبConfirm the supplied pin/retention mechanism and service procedure for the selected bracket.
درجة حرارة العملCurrent brief lists -40°C to +85°C; confirm material, coating, fasteners and assembly requirements for the actual environment.
الشهادةRequest the applicable supplier quality, material/coating and configuration-specific compliance documentation before approval.

مصمم ليتناسب مع المشغل، وليس لاستبدال الأجهزة العامة

For bracket sourcing, “looks close” is not good enough. Check the H-Type bracket against the exact actuator drawing, pin or clevis location, mounting-hole layout, bracket width, fastener size, full-motion clearance and frame material before sample approval. Do not infer fit from a family name alone.

يضع كتالوج ActuLift المحلي هذا الحامل في عائلة أجهزة التركيب بجانب الحوامل من النوع U، الحوامل المصغرة، والألواح الأساسية المستوية. للمشترين الذين يقارنون خيارات الملحقات، فإن الأقواس والتركيبات الفئة هي النقطة المرجعية الداخلية المناسبة. يبقي صفحة الحامل متصلة ببقية نظام التركيب بدلاً من التعامل مع الجزء كقطع غيار متناثرة.

The H-type mounting seat is intended for pivot-style actuator installations, but the bracket cannot correct a poor linkage layout. During engineering review, confirm the expected force, real push/pull direction, side-load risk, pivot angle, pin/fastener selection, mounting-surface strength and full-motion clearance for the actual assembly.

خيارات التشطيب للطلبات OEM والجملة

The current brief references carbon-steel and galvanized construction, but the ordered material grade, thickness and surface treatment should be confirmed on the selected bracket drawing, quotation or material record before production.

If powder coating or another finish is required, confirm which finish is actually available for the selected order and specify coating, color and corrosion-exposure requirements before approving the sample. Do not infer corrosion resistance from finish terminology alone.

إذا كان الحامل جزءًا من بناء تحكم الحركة الكامل، قد يحتاج المشترون أيضًا إلى مشغلات متوافقة مع تغذية راجعة أو وحدة تحكم, control boxes and controllers، أو يتواصل التحكم عن بُعد وأجهزة التحكم. hالمركبة ميكانيكية، ولكن قرار الشراء ينتمي غالبًا إلى نظام مشغل أوسع.

تحققات المشترين قبل الاقتباس

قبل طلب عرض سعر، أرسل سلسلة المشغل، الحمل الثابت المتوقع، دقة المشغل، اتجاه التركيب، رسم الإطار، التشطيب المستهدف، وكمية الدفعة. إذا كان لديك فريق بالفعل لديه رسم ثنائي الأبعاد أو نموذج ثلاثي الأبعاد، قم بإضافته. ذلك يجعل التحقق من الحامل أسرع ويقلل من فرصة الحصول على عينة تتناسب مع المشغل ولكن تفشل في الإطار.

Treat ISO 9001, CE and RoHS references as document-verification items rather than bracket-performance claims. Ask which supplier-quality records, material/coating declarations or configuration-specific documents actually apply to the ordered bracket and destination market.

The current brief lists -40°C to +85°C, but that range should be confirmed for the selected material, coating, fasteners and complete actuator assembly. If the installation involves vibration, outdoor exposure, chemicals or off-axis loading, validate those conditions before mass-production approval.

لماذا يعمل هذا المنتج بشكل جيد

The H-Type Linear Actuator Bracket is an OEM pivot-mount accessory whose final suitability depends on the exact actuator interface, bracket geometry, material and finish, pin/fasteners, load path, mounting surface, environmental conditions and the documents required for the ordered configuration.

الروابط الداخلية المستخدمة

التخصيص للعلامة التجارية الخاصة

تدعم أكتوليفت التخصيص من البداية إلى النهاية، من التصميم الهيكلي ومعلمات الشوط إلى العلامة التجارية واللمسات النهائية للحالات، مما يساعدك على بناء هوية علامة تجارية قوية.

استجابة سريعة ونماذج أولية

نفهم أهمية السرعة في الشراء بين الشركات، باستخدام تدفقات إنتاج محسّنة لضمان استجابة فعالة من تطوير العينات إلى التسليم بالجملة.

Quality Documentation & Traceability

Quality and traceability requirements vary by project. Ask ActuLift for the applicable inspection records, product specifications, drawings and available compliance documentation for the selected model and order.