H-Type Linear Actuator Bracket | OEM Mounting Accessory

H-Type Linear Actuator Bracket for heavy-duty OEM mounting

The H-Type Linear Actuator Bracket is a mechanical mounting accessory for actuator assemblies that use a pivot-style connection. The current product brief references IP1200, IP800 and IP3000 series applications and a 5000N static-load figure. Treat those as procurement references only: confirm the exact actuator model, bracket drawing, pin/hole geometry, material, fasteners, load direction and allowable bracket load before sample approval.

For an OEM buyer, the value is simple: the actuator is only as good as the way it is mounted. A poor bracket choice can shift the load path, add side pressure, or make service work harder than it needs to be. This H-type bracket gives equipment teams a defined mounting accessory for linear actuator integration, especially where a rotary actuator mounting seat is required.

Potential uses include OEM actuator assemblies that require a pivot-mount interface. Application suitability depends on the actual actuator, bracket geometry, frame material, load direction, side-load control, fasteners, clearance and any industry-specific requirements of the finished equipment. If your project also needs matching actuators, start with ActuLift’s heavy duty linear actuators or the broader 12V linear actuator and 24V linear actuator categories.

Product specifications

Built for actuator fit, not generic hardware replacement

For bracket sourcing, “looks close” is not good enough. Check the H-Type bracket against the exact actuator drawing, pin or clevis location, mounting-hole layout, bracket width, fastener size, full-motion clearance and frame material before sample approval. Do not infer fit from a family name alone.

The local ActuLift catalog places this bracket in the mounting hardware family beside U-type brackets, miniature actuator brackets, and flat base plates. For buyers comparing accessory options, the brackets and mountings category is the right internal reference point. It keeps the bracket page connected to the rest of the mounting system instead of treating the part as a loose spare.

The H-type mounting seat is intended for pivot-style actuator installations, but the bracket cannot correct a poor linkage layout. During engineering review, confirm the expected force, real push/pull direction, side-load risk, pivot angle, pin/fastener selection, mounting-surface strength and full-motion clearance for the actual assembly.

Finish options for OEM and wholesale orders

The current brief references carbon-steel and galvanized construction, but the ordered material grade, thickness and surface treatment should be confirmed on the selected bracket drawing, quotation or material record before production.

If powder coating or another finish is required, confirm which finish is actually available for the selected order and specify coating, color and corrosion-exposure requirements before approving the sample. Do not infer corrosion resistance from finish terminology alone.

If the bracket is part of a full motion-control build, buyers may also need compatible actuators with feedback or controller, control boxes and controllers, or remote controls and handsets. The bracket is mechanical, but the purchase decision often belongs to a wider actuator system.

Buyer checks before quotation

Before requesting a quote, send the actuator series, expected static load, actuator stroke, mounting direction, frame drawing, target finish, and batch quantity. If your team already has a 2D drawing or 3D model, include it. That makes the bracket check faster and reduces the chance of a sample that fits the actuator but fails the frame.

Treat ISO 9001, CE and RoHS references as document-verification items rather than bracket-performance claims. Ask which supplier-quality records, material/coating declarations or configuration-specific documents actually apply to the ordered bracket and destination market.

The current brief lists -40°C to +85°C, but that range should be confirmed for the selected material, coating, fasteners and complete actuator assembly. If the installation involves vibration, outdoor exposure, chemicals or off-axis loading, validate those conditions before mass-production approval.

Why this product works well

The H-Type Linear Actuator Bracket is an OEM pivot-mount accessory whose final suitability depends on the exact actuator interface, bracket geometry, material and finish, pin/fasteners, load path, mounting surface, environmental conditions and the documents required for the ordered configuration.

Internal links used

• brackets and mountings
• heavy duty linear actuators
• 12V linear actuator
• 24V linear actuator
• actuators with feedback or controller
• control boxes and controllers
• remote controls and handsets