IP800 Heavy Duty Linear Actuator | OEM Configuration

IP800 Heavy Duty Linear Actuator | OEM Configuration

IP800 is a configurable heavy-duty linear actuator platform for OEM equipment. Confirm load, stroke, speed, control, feedback, duty cycle, environmental protection and applicable documentation for the selected configuration before sample or bulk approval.

Hubungi kami untuk mendapatkan penawaran dan informasi tentang produk ini:

Biasanya kami akan menghubungi Anda dalam waktu 30 menit
Bagikan cintamu

IP800 heavy duty linear actuator for OEM equipment

IP800 is a configurable heavy-duty linear actuator platform for OEM equipment. Final suitability depends on the selected electrical and mechanical configuration, required load, stroke, movement speed, mounting geometry, controller, feedback requirements, duty cycle and operating environment.

For platform comparison, review ActuLift aktuator linier berkinerja tinggi, aktuator linear 12V dan aktuator linear 24V before locking the specification.

Configuration data to confirm before quotation

  • Required supply voltage and electrical limits.
  • Required dynamic, static, push and pull load in the real mechanism.
  • Required stroke, retracted length and extended length.
  • Required movement speed under the expected load.
  • Mounting geometry, linkage angle and side-load control.
  • Expected operating frequency and duty cycle.
  • Feedback, limit, synchronization or position-signal requirements.
  • Controller, cable, connector and wiring requirements.
  • Required environmental or ingress-protection level.
  • Required drawings, test records and compliance documentation.

Load and mechanical integration

Heavy-duty actuator capacity should be confirmed from the complete mechanism rather than from a generic headline rating. Provide the moving load, holding load, installation angle, leverage, friction, side-load risk, shock loads and required safety margin before selecting the final IP800 configuration.

Mounting details can materially change the actuator load and service behavior. Confirm pin locations, bracket spacing and available installation distance during drawing review. Related hardware can be reviewed under Solusi OEM/ODM Kustom.

Stroke and movement-speed selection

Required stroke and movement speed should be specified for the exact application and validated under the real working load. Different gearing, loads and travel requirements can change movement time, current draw and practical performance.

Before quotation, provide the required stroke, installation dimensions and motion-time target. Sample validation should check full travel, end-of-stroke behavior, current draw, vibration and mechanical interference.

Electrical, feedback and control matching

Confirm the applicable supply specification, rated and peak current, switching method, cable length, connector capacity and controller interface for the selected IP800 build.

If the project requires feedback, synchronization, limit confirmation or position control, confirm the exact sensor and signal arrangement before approval. Related options can be reviewed under control boxes and controllers.

Environmental and protection requirements

Environmental suitability depends on the exact actuator build, seals, cable exits, connectors, mounting direction and surrounding equipment. If the project requires a specific ingress-protection level, washdown method, temperature range, humidity limit, dust exposure or outdoor condition, request the current supporting test basis or documentation for the ordered configuration.

Projects driven by environmental exposure can also review ActuLift aktuator linier tahan air, but the final IP800 protection requirement still needs product-specific evidence.

Noise, duty-cycle and lifecycle validation

For equipment used near people, define an acceptable sound target and test the actuator inside the finished mechanism. Structure, mounting, load balance and controller behavior can materially change what users hear.

Duty cycle and service-life requirements should be matched to the actual ON/OFF pattern, load and ambient conditions. Request applicable validation data if the project has defined holding, continuous-operation, lifecycle or environmental-resilience requirements.

Compliance and documentation

For export programs, regulated equipment or customer quality systems, request the documentation package for the exact IP800 configuration. Depending on the project, this may include drawings, product specifications, wiring information, inspection records, material information, environmental test evidence or available compliance declarations.

Do not treat generic page wording as proof that CE, RoHS, ISO 9001 or another certification applies unchanged to every configuration or to the buyer’s finished machine.

Daftar periksa pembeli OEM

  • Confirm the exact IP800 configuration before sample approval.
  • Confirm moving and holding load, stroke, speed and mounting geometry from the real mechanism.
  • Confirm supply, current, wiring, connectors and controller compatibility.
  • Confirm feedback, limit or synchronization requirements where applicable.
  • Confirm environmental/protection requirements with supporting documentation.
  • Confirm duty-cycle, lifecycle and holding requirements from the actual use case.
  • Confirm the documentation package required before bulk approval.

Where IP800 fits

IP800 is best treated as a configurable heavy-duty linear actuator platform for OEM motion systems rather than a fixed universal specification. Use the product page to begin sourcing, then lock the exact electrical, mechanical, environmental and documentation requirements through drawings, samples and project-specific validation.

Kustomisasi OEM & Label Pribadi

ActuLift mendukung kustomisasi dari awal hingga akhir, mulai dari desain struktural dan parameter jalur hingga branding dan penyelesaian casing, membantu Anda membangun identitas merek yang kuat.

Respons Cepat & Prototyping

Kami memahami pentingnya kecepatan dalam pengadaan B2B, memanfaatkan alur kerja produksi yang dioptimalkan untuk memastikan respons efisien dari pengembangan sampel hingga pengiriman massal.

Quality Documentation & Traceability

Quality and traceability requirements vary by project. Ask ActuLift for the applicable inspection records, product specifications, drawings and available compliance documentation for the selected model and order.