Micro Mini Linear Actuator Bracket | OEM Mounting Accessory

Micro Mini Linear Actuator Bracket for compact OEM assemblies

The Micro Mini Linear Actuator Bracket is a mounting accessory for compact linear-actuator assemblies. Its job is mechanical: connect the actuator to the frame or linkage with the correct geometry, clearance and load path.

Electrical voltage, actuator speed, actuator stroke, motor noise and enclosure protection belong to the selected actuator or complete motion system, not to the bracket itself. Those values should not be treated as bracket specifications.

For buyers comparing compact motion hardware, review the bracket together with ActuLift’s Микро и мини линейные приводы. If the project uses a 12V or 24V motion platform, the voltage selection should be confirmed on the actuator and controller rather than on the bracket.

Bracket information to confirm

Why bracket fit matters

A compact actuator can still develop damaging side load if the bracket is misaligned. The bracket should hold the selected actuator on the intended motion axis while preserving clearance through the complete extension and retraction cycle.

Before approving a sample, check actuator body clearance, pivot geometry, pin retention, fastener access and the strength of the structure that receives the bracket. The surrounding frame can become the weak point even when the bracket itself is adequately sized.

Keep actuator specifications separate from bracket specifications

Do not assign 12V/24V voltage, actuator stroke, actuator speed, motor noise or actuator ingress-protection ratings to this bracket. If those values matter to the project, verify them on the selected actuator datasheet, drawing, test report or quotation.

For system planning, compare the selected actuator with ActuLift’s 12В линейные приводы, 24В линейные приводы, Контрольные боксы и контроллеры и Приводы с обратной связью/контроллером.

What OEM buyers should send for quotation

• Selected actuator model or actuator drawing
• Required pin size and hole spacing
• Bracket orientation and available installation envelope
• Load direction and expected static/dynamic assembly load
• Frame material and fastening method
• Required material, coating or surface finish
• Corrosion, moisture, cleaning or outdoor exposure requirements
• Target quantity and any OEM dimensional changes

If the actuator system itself requires sealed or outdoor-capable hardware, evaluate that requirement separately through ActuLift’s Водонепроницаемые линейные приводы category and request the supporting environmental documentation for the selected actuator.

Evidence boundary

The current product-page evidence set identifies this item as a mounting bracket/accessory but does not include an independent bracket drawing, load test, material certificate or compliance report. Final dimensions, material, load capability, actuator compatibility and environmental suitability therefore require confirmation on the approved project documentation before production.