Nhà sản xuất Bộ truyền động tuyến tính mini 12V HR61H | Điều khiển chuyển động chính xác cho tự động hóa công nghiệp

HR61H 12V mini linear actuator for compact equipment builds

The HR61H 12V Mini Linear Actuator is built for OEM buyers who need strong, quiet linear motion in a compact package. The requested configuration uses 12V DC input, with a 24V linear actuator version also available for projects that need a different power architecture.

What stands out from the specs is the force-to-size direction. This model is listed with 1500N thrust and 1000N tension, so it gives equipment designers more working room than many small actuator choices. That can help in compact medical equipment, indoor automation, smart furniture, inspection devices, access panels, and other products where the actuator must fit into a tight space but still move with control.

For category planning, HR61H belongs naturally with ActuLift’s Thiết bị truyền động tuyến tính 12V và micro and mini linear actuators. If your system uses a 24V bus, compare the project with the thiết bị truyền động tuyến tính 24V category before you lock the electrical layout.

Thông số sản phẩm

Built for force, speed, and controlled motion

A compact actuator should not be chosen by size alone. For sourcing, the first check is simple: can the actuator handle the real push and pull requirement after friction, mounting angle, and mechanical leverage are included?

The HR61H gives buyers a clear starting point: 1500N thrust and 1000N tension. That makes it useful for compact motion tasks where the load is not just decorative. The 25 mm/s no-load speed and 18 mm/s full-load speed also make quotation review easier because your team can estimate real movement time before sample testing.

Still, load charts and speed values only tell part of the story. If the actuator will lift a hinged panel, move an offset bracket, or push against uneven resistance, ask for engineering confirmation on side load, mounting geometry, duty cycle, and end-position behavior. For projects that need position feedback or coordinated movement, review ActuLift’s các bộ chuyển động có phản hồi/điều khiển early instead of adding control requirements after the mechanical design is fixed.

Customizable 50-300 mm travel for OEM product lines

The listed travel range is 50 mm to 300 mm, with customization available. That is useful when one buyer needs several related SKUs: a short-stroke version for a compact device, a mid-stroke version for an adjustable module, and a longer stroke version for a larger mechanism.

Before ordering samples, give the supplier the full motion brief:

• Required stroke length and acceptable tolerance
• Retracted length and extended length targets
• Push and pull load in the real installation
• Mounting hole type, bracket type, and cable exit direction
• Voltage, controller, switch, and feedback requirement
• Duty cycle and expected daily operating pattern

This is where many actuator projects go wrong. The actuator may look correct on a datasheet, then fail the layout because the bracket, controller, or cable route was treated as an afterthought. For a cleaner quote, pair the HR61H with the correct control boxes and controllers and confirm the mounting hardware with giá đỡ và lắp đặt during the same sample round.

IP65 waterproof rating with practical installation checks

The requested HR61H configuration lists IP65 waterproof protection. In buyer language, that makes the actuator suitable for dust and water-exposure planning under defined IP test conditions. It is a good fit to review alongside ActuLift’s bộ kích tuyến tính chống nước when the final product may face dust, splash, humid indoor use, protected outdoor use, or cleaning exposure.

Use the IP65 claim carefully. It does not mean the final machine is ready for immersion, high-pressure washing, chemical cleaning, salt spray, or every outdoor condition. The real result depends on connector sealing, cable routing, mounting angle, drainage, enclosure design, and the way the finished product is used.

For procurement, write the environment into the RFQ. “IP65” is a start. “IP65 actuator for a covered outdoor cabinet with vertical mounting, sealed connector, and occasional hose splash” is much better.

Quiet operation for indoor and user-facing equipment

The acoustic value is listed as <45 dB, described in the brief as library-quiet operation. That kind of noise target matters when the actuator works near people: medical equipment, lab tools, smart furniture, small automation devices, and customer-facing machines.

Quiet operation should still be checked in the final assembly. Brackets, panels, resonance, load direction, and controller behavior can all add noise. During sample testing, run the actuator under the real load, in the real enclosure, with the final bracket style. That test gives your engineering team a more useful answer than a bench-only noise value.

Compliance notes for wholesale and OEM buyers

The HR61H brief lists CE, RoHS, and ISO 9001 compliant. For a product page, those terms should stay precise:

• CE should be treated as applicable compliance marking, not as “EU approved” wording.
• RoHS relates to restricted hazardous substances in electrical and electronic equipment.
• ISO 9001 supports quality management system evaluation. It should not be written as a direct product performance certificate.

For distributors and OEM buyers, the practical request is simple: ask for the matching declaration, test report, certificate copy, datasheet, drawing, and inspection standard for the exact configuration you plan to order. If the voltage, cable, connector, stroke, sealing, or controller changes, confirm whether the documentation still applies.

OEM quotation checklist

For faster sampling, send ActuLift a complete actuator brief instead of only asking for “HR61H price.” Include:

• Target voltage: 12V DC or 24V version
• Required thrust and tension margin
• Stroke length from 50 mm to 300 mm
• Dự đoán tốc độ không tải và tải đầy đủ
• Chi tiết về môi trường IP65
• Yêu cầu về tiếng ồn và môi trường sử dụng
• Loại lắp đặt, yêu cầu giá đỡ và hướng dây cáp
• Yêu cầu về bộ điều khiển, tay cầm hoặc phản hồi
• Số lượng, lịch trình mẫu và yêu cầu đóng gói
• Các tài liệu CE, RoHS và ISO 9001 cần thiết

Điều này giúp cả hai bên. Nhóm của bạn nhận được báo giá gắn liền với máy thực tế, và nhà cung cấp có thể đánh dấu các rủi ro trước khi mẫu đầu tiên được xây dựng.

Tại sao sản phẩm này hoạt động tốt

HR61H hoạt động tốt cho các khách hàng OEM cần chuyển động 12V nhỏ gọn với lực thực tế. Đặc điểm 1500N đẩy, 1000N kéo, tốc độ 25/18 mm/s, khoảng di chuyển tùy chỉnh 50-300 mm, bảo vệ IP65, và mục tiêu tiếng ồn <45 dB khiến nó trở thành nền tảng bộ truyền động thực tế cho thiết bị khách hàng, nơi kích thước, sức mạnh và chuyển động êm ái đều quan trọng.

Liên kết nội bộ đã sử dụng

1. Thiết bị truyền động tuyến tính 12V
2. micro and mini linear actuators
3. thiết bị truyền động tuyến tính 24V
4. các bộ chuyển động có phản hồi/điều khiển
5. control boxes and controllers
6. giá đỡ và lắp đặt
7. bộ kích tuyến tính chống nước