Bộ truyền động tuyến tính công nghiệp IP3000H B2B | Điều khiển chuyển động chính xác

Industrial linear motion with 2800N load capacity

The IP3000H Industrial Linear Actuator is built for OEM buyers who need stronger linear movement in a compact DC motion package. The listed configuration supports 12V DC or 24V DC input, up to 2800N (630 lbs) load capacity, 30mm to 1000mm customizable travel, and a speed range from 5 mm/s to 88 mm/s.

That mix gives design teams room to tune the actuator around real equipment needs. Some projects need slow, controlled movement under load. Others need a faster stroke when the mechanism is lighter or when cycle time matters more. Based on the listed specs, IP3000H works best as a configurable actuator platform for machinery adjustment, access panels, industrial furniture, lifting modules, care equipment, smart furniture, and other embedded motion systems.

If your platform already uses DC power, the IP3000H can sit naturally beside ActuLift’s Thiết bị truyền động tuyến tính 12V hoặc thiết bị truyền động tuyến tính 24V ranges. The right voltage should be chosen with the controller, cable length, current draw, and power supply in mind. It is a system choice, not just a catalog checkbox.

Thông số sản phẩm

What procurement should confirm before sample order

For a wholesale or OEM project, the IP3000H should be specified as part of the full motion system. Start with the real load at the moving point, then confirm stroke length, speed target, mounting direction, duty cycle, cable exit, controller type, operating environment, and the available installation space.

The 2800N rating is a useful high-load starting point. Still, it does not remove the need for mechanical review. Side load, poor bracket alignment, short lever arms, or a heavy moving structure can create stress that the actuator was not meant to carry. For that reason, buyers should review mounting early through ActuLift’s giá đỡ và lắp đặt category instead of leaving hardware selection until the final build.

Speed needs the same care. A fast no-load speed can look attractive on a product page, but the real mechanism may need slower movement when the actuator is pushing the selected load. Ask for sample testing or a speed/load confirmation tied to the exact stroke, voltage, and mounting layout. That small step can prevent a lot of rework later.

Custom travel length and OEM configuration

The 30mm to 1000mm travel range gives the IP3000H broad fit across equipment layouts. Short strokes can work for locks, clamps, access panels, and compact adjustment points. Longer strokes can suit lift, tilt, extension, or sliding mechanisms where the actuator has to move a larger structure through a longer path.

Because the travel length is customizable, buyers should freeze the required stroke before sample approval. Once a made-to-order actuator is produced, do not assume the stroke can be changed in the field. The clean buying path is simple: define the engineering requirement, approve the drawing, test the sample, then lock the production specification.

If the actuator will run inside a larger motion platform, match it early with ActuLift’s hộp điều khiển và bộ điều khiển. For operator-facing systems, add the needed các bộ điều khiển từ xa và bộ điều khiển cầm tay to the same review. This helps confirm voltage, current capacity, wiring, limit control, user operation, and packaging before mass production starts.

IP20 standard, with IP65/66 through OEM

The standard IP20 protection level should be treated as an indoor or protected-equipment baseline. It can fit enclosed mechanisms, guarded machine sections, furniture systems, and applications where the actuator does not face dust-heavy, wet, outdoor, or washdown conditions.

If the final equipment may face rain, dust, spray, cleaning water, or outdoor exposure, request the OEM IP65 or IP66 configuration before sample order. IEC guidance treats IP ratings as defined tests for protection against solid objects, dust, and water. That makes IP65/66 useful for environmental planning, but it should still be matched to the final installation, cable routing, connector choice, and enclosure design.

Buyers comparing environmental options can also review ActuLift’s bộ kích tuyến tính chống nước category. Use it as a planning reference when ingress protection is the main purchasing risk.

CE and RoHS wording for buyer files

The user-provided specification says the IP3000H is compliant with CE and RoHS standards. That is useful for B2B product pages, but procurement teams should still request the current declaration, model-specific documents, and any available test reports before import, resale, or equipment-level certification work.

For CE, the European Commission describes the mark as the manufacturer’s declaration that the product meets applicable EU requirements. It is not an approval stamp from the EU. For RoHS, buyers should check restricted-substance documentation for the electrical and electronic parts used in the selected build.

That wording keeps the page useful without overselling compliance. It gives distributors and OEM buyers the terms they need, while leaving final-device approval where it belongs: with the finished equipment review.

Best-fit applications

The IP3000H is a good fit for equipment that needs controlled linear force, selectable DC voltage, a wide travel range, and low operating noise. Typical use cases include industrial automation fixtures, adjustable machine guards, access panels, smart furniture, care equipment, lifting modules, mobile equipment, and actuator-driven positioning systems.

The listed <48 dB noise level matters in these settings. It gives equipment builders a better starting point when the actuator operates near operators, patients, office workers, or customers. Quiet motion is not only a comfort point. In many machines, it also makes the finished product feel better built.

Buying notes for distributors and OEM teams

For distributor listings, lead with the simple facts: 12V DC/24V DC, 2800N load capacity, 5 mm/s to 88 mm/s speed range, 30mm to 1000mm customizable travel, standard IP20, optional IP65/66 through OEM, and CE/RoHS compliance.

For OEM quoting, ask the buyer for the load, stroke, speed, voltage, duty cycle, mounting direction, bracket style, control method, cable length, connector requirement, protection level, quantity, and target application. The more complete the first brief is, the easier it is to avoid sample revisions.

Tại sao sản phẩm này hoạt động tốt

IP3000H works well for OEM buyers who need configurable force without moving to a complex motion system. Its 2800N load rating, 12V/24V DC options, wide stroke range, and optional IP65/66 protection give engineering teams room to match real equipment requirements. The <48 dB noise level also helps when the actuator operates close to users or operators.

Liên kết nội bộ đã sử dụng

• Thiết bị truyền động tuyến tính 12V
• thiết bị truyền động tuyến tính 24V
• giá đỡ và lắp đặt
• hộp điều khiển và bộ điều khiển
• các bộ điều khiển từ xa và bộ điều khiển cầm tay
• bộ kích tuyến tính chống nước