


Giá đỡ máy dẫn động phẳng IP1200 is a configurable heavy-duty linear actuator platform for OEM equipment. The current product brief lists 12V/24V DC options, a 5400N load figure, 50–600mm stroke choices, load-dependent speed values, and an IP66 enclosure rating.
Working load, stroke, speed, temperature, noise, enclosure protection, materials, self-locking behavior, controller compatibility and compliance documentation depend on the selected configuration. Confirm the current drawing, engineering specification, test conditions and required documents before sample approval or bulk ordering.
Email của bạn
The IP1200 is a heavy-duty linear-actuator platform for OEM equipment. The current product brief lists 12V DC / 24V DC options and a 5400N load figure. Treat those values as configuration-specific procurement inputs and confirm the selected motor, gearing, load direction, duty cycle, mounting geometry, controller and test conditions before sample approval.
Potential applications include industrial machinery, agricultural equipment, hatches, tracking mechanisms and other higher-load OEM assemblies. Suitability for any application depends on the real load case, mounting geometry, duty cycle, environment, safety factor and the selected actuator configuration. If your project already uses DC control architecture, the IP1200 can be reviewed alongside ActuLift’s Thiết bị truyền động tuyến tính 12V và thiết bị truyền động tuyến tính 24V to match voltage, wiring, and control needs.
For B2B buyers, the useful part is the complete configuration: rated working load, speed under load, stroke and installation length, enclosure protection, operating environment, acoustic target, controller compatibility and supporting documentation. A heavy actuator can still fail in the wrong frame, so the mounting distance, load direction, bracket style, controller rating, and duty cycle should be checked before sample approval.
| Thông số kỹ thuật | Chi tiết |
|---|---|
| Điện áp đầu vào | Current brief lists 12V / 24V DC; confirm the selected motor, controller, current requirement and wiring. |
| Khả năng tải tối đa | Current brief lists 5400N; confirm rated working load, push/pull direction, duty cycle, mounting geometry, safety factor and test conditions. |
| Tốc độ (Không tải/Tải đầy đủ) | Current brief lists 18mm/s no-load and 12mm/s full-load; confirm gearing, supply, expected load and measured speed for the selected build. |
| Chiều dài hành trình | Current brief lists 50–600mm; confirm available stroke, retracted/extended dimensions and customization for the selected build. |
| Mức độ bảo vệ | Current brief lists IP66. Confirm the exact enclosure build and current test documentation; do not treat the rating as a blanket waterproof-use guarantee. |
| Nhiệt độ làm việc | Current brief lists -40°C to +85°C; confirm motor, gearbox, lubrication, cable, seals, controller, load and actual environment for the selected build. |
| Mức độ tiếng ồn | Current brief lists <45dB; confirm load, speed, distance, measurement method, mounting structure and test environment. |
| Chứng nhận | Request current model/configuration-specific CE/RoHS records and any applicable supplier quality-system documentation before approval. |
The IP1200 sits in the các bộ truyền động tuyến tính siêu nặng category. The current brief lists a 5400N load figure, but that number should not be treated as a universal working-load guarantee. Confirm load direction, mounting angle, duty cycle, safety factor and the exact test basis for the selected configuration.
The current brief lists 18mm/s with no load and 12mm/s at full load. Actual speed depends on the selected gearing, supply, controller, load and mechanism. Confirm speed under the expected working load and use the verified value for cycle-time calculations.
The current brief lists 50mm to 600mm stroke options. Confirm which stroke is available for the selected build together with retracted length, extended length, mounting-hole geometry, load direction and surrounding clearance before locking the equipment design.
The current brief lists IP66. For projects comparing higher-protection products, the IP1200 may be reviewed alongside ActuLift’s bộ kích tuyến tính chống nước, but the page should not convert an IP code into a blanket waterproof, washdown or outdoor-use guarantee. Confirm the exact enclosure, cable exits, connectors and current IP test documentation for the selected build.
Environmental suitability depends on more than the actuator body. Cable exits, connectors, mounting angle, drainage, enclosure details, cleaning method and installation geometry all affect the finished assembly. Review those conditions with the selected actuator build before approval.
The current brief lists -40°C to +85°C. Confirm that range for the selected motor, gearbox, lubrication, seals, cable, controller and load case, and validate the complete machine under its actual duty cycle and environmental conditions.
The IP1200 is not just a motorized rod on its own. In a real OEM build, it usually needs the right brackets, control method, power supply, cable layout, and limit settings. For the mechanical side, ActuLift’s giá đỡ và lắp đặt category is a natural next check because a high-load actuator needs a clean load path.
For electrical integration, review the actuator with the correct control boxes and controllers. A controller that is too small for the load can create trouble even when the actuator itself is correctly sized. If the end user needs manual adjustment, service movement, or simple operator input, the control interface should be confirmed during sample review.
For OEM systems that require the actuator, brackets, controls, wiring and environmental protection to work together, it is usually better to source the relevant components as a matched package. That keeps the sample test cleaner. It also reduces the back-and-forth that happens when a bracket, control box, or cable is chosen after the actuator has already been approved.
The current brief references CE, RoHS and ISO 9001-related documentation. Do not treat that generic listing as evidence that every IP1200 configuration has identical coverage.
For procurement, request the current model- and configuration-specific declarations, reports or material-compliance records that apply to the ordered actuator. Supplier quality-system documentation is separate from product performance and does not replace application validation by the buyer.
Before a bulk order, ask for the exact documents tied to the model and configuration you plan to buy. For many OEM teams, that document pack may include a specification sheet, drawing, wiring note, test report, declaration of conformity, RoHS statement, packaging plan, sample approval record, and production inspection checklist.
The current brief lists 12V DC and 24V DC options. Confirm which voltage is available for the selected build together with current draw, controller rating, wiring and the rest of the equipment power architecture.
The current brief lists 5400N. Confirm the rated working load and test basis for the selected build, then verify the complete mechanism with the real mounting angle, load direction, duty cycle, friction, safety factor and controller settings.
The current brief lists IP66, but that should not be presented as a universal waterproof-use claim. Confirm the exact enclosure build and current test documentation, then evaluate cable exits, connectors, mounting orientation and the real exposure conditions of the finished equipment.
The current brief lists 50mm to 600mm stroke options. Confirm the exact available stroke plus retracted/extended dimensions and mounting geometry for the selected build.
Start with mounting brackets, a compatible controller, the power supply, wiring, and any operator control such as a handset or switch. For high-load builds, the bracket and frame design matter as much as the actuator rating.
Ask for the specification sheet, dimensional drawing, wiring information, certification or declaration files, RoHS statement, quality inspection process, packaging details, and sample approval terms. For regulated equipment, your own compliance team should also review the finished machine.
The IP1200 is a configurable heavy-duty OEM actuator platform. Final suitability depends on the selected voltage, rated working load, stroke and installation dimensions, load-dependent speed, enclosure protection, temperature and acoustic requirements, mounting geometry, duty cycle, controller interface and the documentation required for the ordered configuration.
