


Giá đỡ máy dẫn động phẳng IPF12 Telescopic Lifting Column is a configurable OEM vertical-motion platform. The current product brief lists 12V/24V DC, an 800N load figure, 500mm travel, a 15mm/s speed figure, an acoustic figure below 48dB, and multiple enclosure-protection references.
Load, travel, speed, noise, enclosure protection, temperature, materials, controls, medical/regulated-equipment suitability and compliance documentation depend on the selected configuration. Confirm the current drawing, engineering specification, test conditions and required documents before sample approval or bulk ordering.
Email của bạn
The IPF12 is a telescopic lifting-column platform for OEM vertical-motion systems. The current product brief lists 12V/24V DC, an 800N load figure and a 15mm/s speed figure. Treat those as configuration-specific procurement inputs and confirm the selected column, controller, load direction, duty cycle, mounting geometry and test conditions before sample approval.
This is a procurement-focused lifting column, not a one-size-fits-all retail part. The current brief lists a 500mm travel figure and customization options, but the available stroke, retracted/extended dimensions and higher-load variants should be confirmed for the selected build before the equipment frame is finalized.
If your project is still at the design stage, place IPF12 beside ActuLift’s cột nâng dạng ống lồng category first. It helps your engineering and sourcing teams compare the product against other vertical motion columns before sample approval.
| Thông số kỹ thuật | Chi tiết |
|---|---|
| Tên sản phẩm | IPF12 Telescopic Lifting Column |
| Chế độ khán giả | Bán buôn/OEM B-end |
| 12V DC/24V DC (độ sai lệch dải rộng) | Current brief lists 12V/24V DC; confirm the selected motor, controller, current requirement and wiring. |
| Khả năng chịu tải tối đa | Current brief lists 800N; confirm rated working load, load direction, duty cycle, mounting geometry and test conditions for the selected build. |
| Tốc độ (không tải/tải đầy đủ) | Current brief lists 15mm/s; confirm load-dependent speed, supply, controller and test conditions. |
| Chiều dài di chuyển | Current brief lists 500mm; confirm available travel plus retracted/extended dimensions and customization for the selected build. |
| Cấp bảo vệ | Current brief references IP43 and higher-protection options. Confirm the exact enclosure configuration and current test documentation for the selected build. |
| Nhiệt độ làm việc | Current brief lists 0°C to +40°C; confirm motor, controller, lubrication, cable, load and actual operating environment. |
| Đặc tính âm học | Current brief lists <48dB; confirm load, speed, distance, mounting structure, measurement method and test environment. |
| Chứng nhận | Request current model/configuration-specific CE/RoHS or other applicable compliance documentation before approval. |
The current brief lists 12V/24V DC. Confirm the selected column voltage together with controller, power supply, wiring, current demand and other system components before locking the electrical architecture.
The current brief lists 15mm/s and an acoustic figure below 48dB. Actual speed and noise depend on the selected motor/controller, working load, mounting structure, housing resonance, measurement distance and test method. Confirm those values on the selected build instead of presenting them as universal performance guarantees.
The current brief references IP43 and higher-protection options, but those references should not be converted into blanket indoor, outdoor, washdown, waterproof or medical-cleaning claims. Confirm the exact enclosure, cable exits, connectors, mounting orientation and current test documentation for the selected configuration.
For matching control hardware, ActuLift’s control boxes and controllers và các bộ điều khiển từ xa và bộ điều khiển cầm tay are useful internal reference points during system planning.
For wholesale and OEM work, the IPF12 page should not stop at the base model. The real buying question is whether the column can be tuned to the equipment envelope. Start with these checks:
If the project uses other low-voltage motion parts, the Thiết bị truyền động tuyến tính 12V và thiết bị truyền động tuyến tính 24V categories can help buyers keep voltage choices consistent across the equipment family. If the final device may face moisture, the bộ kích tuyến tính chống nước category is also worth reviewing before confirming the protection level.
Potential uses include adjustable furniture, lift mechanisms and other OEM equipment that requires a telescopic vertical-motion column. Suitability for medical, care-related or other regulated equipment must be evaluated against the finished-system requirements, load case, controls, environment and applicable documentation.
For heavier or more industrial equipment, buyers should not stretch the standard spec beyond its comfort zone. Ask ActuLift to confirm whether a custom heavy-duty lifting column is the better route, then compare the project against industrial or mobile column lift options before sample approval.
The current brief references CE and RoHS, but that generic statement should not be treated as proof of coverage for every IPF12 configuration. Request the current model- and configuration-specific declarations, reports or material-compliance records that apply to the ordered column and destination market.
For enclosure protection, use the same discipline. The current brief references IP43 and higher-protection variants, but the purchase order should identify the exact selected enclosure configuration and supporting test documentation rather than assuming all ratings are interchangeable.
The current brief lists 12V/24V DC. Confirm the final voltage, current requirement, controller, power supply and wiring for the selected configuration during quotation.
The current brief lists 800N. Confirm the rated working load, load direction, duty cycle, mounting geometry, safety factor and test conditions for the selected build. If the project needs more force, review a separately specified higher-load configuration rather than assuming the base model can be uprated.
The current brief lists 500mm travel. Confirm the exact available travel plus retracted/extended dimensions and installation envelope for the selected build during the RFQ stage.
The current brief references IP43 and higher-protection options. Confirm the exact selected enclosure and current test documentation before ordering, especially when the finished equipment may face water, cleaning or outdoor exposure.
The current brief lists an acoustic figure below 48dB. Do not present that as “library-grade silence” without the measurement basis; confirm load, speed, distance, mounting structure, housing resonance, controller behavior and test method on the selected build.
Send the required load, travel length, voltage, duty use, protection level, control method, mounting space, cable length, target quantity, and any CE/RoHS document needs. A drawing or equipment photo helps the engineering team avoid guesswork.
IPF12 is a configurable OEM lifting-column platform whose final suitability depends on the selected voltage, rated working load, travel and installation dimensions, load-dependent speed, acoustic target, enclosure protection, controller interface, environment, mounting geometry, duty cycle and the documentation required for the ordered configuration.
