Proveedor OEM de Actuador Lineal de 24V IP80 | Control de Movimiento de Precisión para Aplicaciones Compactas

Proveedor OEM de Actuador Lineal de 24V IP80 | Control de Movimiento de Precisión para Aplicaciones Compactas

El IP80 is a compact OEM linear-actuator platform for short-travel motion systems. The current product brief lists 24V DC with a 12V option, a 200N push/pull figure, 10–200mm stroke choices, multiple speed options, and IP42/IP65 enclosure variants.

Load, stroke, speed, noise, enclosure protection, controller compatibility, materials, and compliance documentation depend on the selected configuration. Confirm the current drawing, datasheet or engineering specification, test conditions, and required documents before sample approval or bulk ordering.

Contáctenos para obtener un presupuesto e información sobre este producto:

Normalmente te contactaremos en un plazo de 30 minutos
Comparte tu aprecio

Actuador lineal IP80 24V para proyectos de movimiento compactos

The IP80 is a compact linear-actuator platform for OEM equipment that needs short-travel motion in a limited installation space. The current product brief lists 24V DC with a 12V option and a 200N push/pull figure. Treat those as configuration-specific procurement inputs and confirm the selected motor, gearing, load direction, duty cycle, controller, and test conditions before sample approval.

Potential use cases include compact furniture mechanisms, vents or panels, fixtures, enclosure automation, and other light-motion OEM assemblies. Application suitability should not be inferred from the category name alone: confirm the actual load, stroke, mounting geometry, environment, duty cycle, noise target, and any industry-specific requirements for the finished equipment.

Para los compradores que comparan categorías de ActuLift, este modelo pertenece naturalmente a Actuadores lineales de 24V and compact OEM motion projects. If the same system needs higher enclosure protection, ask which IP-rated configuration is actually available for the selected build and request the current test documentation before comparing it with ActuLift’s actuadores lineales a prueba de agua. Para cargas más pesadas, el comprador debería mover la comparación hacia actuadores lineales de alta resistencia en lugar de forzar un modelo compacto en el trabajo incorrecto.

Especificaciones del producto

EspecificaciónDetalles
Tensión de entradaCurrent brief lists 24V DC with a 12V option; confirm the selected motor, controller, current requirement, and wiring.
Capacidad de carga máximaCurrent brief lists 200N push/pull; confirm rated working load, load direction, duty cycle, mounting geometry, and test conditions.
Velocidad (sin carga/carga total)Current brief lists 4 / 8 / 15 / 30mm/s options; confirm the selected gearing, expected load, supply, and measured speed.
Longitud de recorridoCurrent brief lists 10–200mm; confirm available stroke, retracted/extended dimensions, and customization for the selected build.
Nivel de protecciónCurrent brief lists IP42 and an IP65 option; confirm the exact enclosure build and current test documentation.
Temperatura de trabajoCurrent brief lists -20°C to +60°C; confirm the selected motor, gearbox, lubrication, cable, controller, load, and actual environment.
Certificación CE, RoHS, certificación del sistema de gestión de calidad ISO 9001Current brief lists <45 dB; confirm load, speed, distance, measurement method, mounting structure, and test environment.
CertificaciónRequest current model/configuration-specific CE/RoHS or other applicable compliance documentation before approval.

Lo que la calificación de 200N significa para la adquisición

The current product brief lists 200N push/pull. Do not treat that figure as a universal working-load promise. Stroke length, load direction, bracket geometry, moving angle, friction, side load, duty cycle, controller output, gearing, and safety factor all affect the finished mechanism, so confirm the selected configuration against the actual load case.

Para la aprobación de muestras, solicita a ingeniería que confirme la carga de movimiento real, el peor ángulo operativo y la fuerza necesaria al arrancar. Si la estructura en movimiento se atora, incluso una calificación de carga correcta puede no salvar el mecanismo. Un camino mecánico limpio es importante.

The current brief lists 4, 8, 15, and 30mm/s speed options. Availability and achieved speed depend on the selected gearing, motor, supply, load, and controller. Confirm speed under the expected working load rather than selecting from the catalog number alone.

Stroke and installation envelope

The current brief lists stroke choices within 10mm to 200mm. Confirm the exact available stroke together with retracted length, extended length, mounting-hole positions, cable exit, and surrounding clearance. Suitability for a door, panel, shutter, furniture module, tracking mechanism, or other application depends on the complete mechanical design.

Al solicitar una cotización, incluye la longitud de recorrido objetivo, la longitud replegada si se conoce, dirección de montaje, dirección del cable, preferencia de velocidad, voltaje y carga esperada. Si tu equipo tiene un archivo CAD o un plano de instalación, envíalo temprano. Ahorra tiempo porque el proveedor puede verificar si el actuador, soporte y estructura móvil tienen suficiente espacio libre.

Para proyectos que necesitan soportes o hardware de pivote, combina la discusión del actuador con — Ingeniería de movimiento a medida para. Para sistemas que necesitan operación manual o lógica de múltiples actuadores, revisa control boxes and controllers y los controles remotos y manos libres antes de confirmar la muestra.

Enclosure protection requires build confirmation

The current product brief lists IP42 and an IP65 option. Do not infer indoor, outdoor, dust, spray, wash-down, or other environmental suitability from that option list alone. Confirm the exact enclosure, cable exits, connectors, mounting orientation, and current IP test documentation for the selected build.

Aquí está la versión sencilla: no trates el IP65 como un permiso para ignorar el resto del diseño. Las salidas de cable, conectores, ángulo de montaje, método de limpieza, ciclo de trabajo y diseño del recinto siguen siendo importantes. Las clasificaciones de IP de la IEC describen pruebas de protección de recinto definidas. No reemplazan la validación del equipo final.

Para compradores B2B, la pregunta de compra más segura no es “¿es a prueba de agua?” Es “¿qué grado de protección coincide con nuestro entorno exacto, y podemos obtener los documentos para esta configuración?” Esa redacción mantiene el proyecto honesto.

Noise performance requires installation testing

The current product brief lists an acoustic figure below 45 dB. Treat that as a value requiring test-condition confirmation, not as a universal “silent” or “library-quiet” claim. Load, speed, mounting structure, resonances, distance, measurement method, and room conditions can materially change the observed result.

El ruido aún depende del mecanismo completo. Un actuador silencioso puede sonar áspero si el marco resuena, el soporte está suelto o la carga no está guiada. Durante las pruebas de muestra, ejecuta el actuador dentro de la estructura real cuando sea posible. Las pruebas en banco son útiles, pero no cuentan toda la historia.

Si el comprador está construyendo una línea de productos orientada a las personas, este modelo debe ser probado dentro de la estructura terminada, con el soporte y recinto reales, antes de la aprobación de la muestra.

Personalización OEM y verificaciones de cumplimiento

The IP80 is positioned for OEM configuration work. Buyers can define voltage, stroke, required speed, protection target, mounting style, wiring, controller interface, and documentation needs, but final availability and performance should be captured in the selected-build specification and validated through sampling.

Antes de la producción en masa, confirma estos artículos:

  1. Longitud de recorrido, longitud replegada y diseño de agujeros de montaje.
  2. Voltaje, consumo de corriente, compatibilidad del controlador y longitud del cable.
  3. Required speed and the verified speed under the expected working load.
  4. Required enclosure protection and the current test documentation for the selected build.
  5. Expectativa de ciclo de trabajo y límites térmicos.
  6. Any required CE/RoHS or other applicable documents for the ordered configuration.

Do not treat a generic CE/RoHS statement as evidence for every IP80 configuration. Request the current model- and configuration-specific declarations, reports, or material-compliance records needed for import review, tender files, or distributor onboarding. The buyer’s finished equipment may have separate compliance obligations.

Resumen sugerido para el comprador para cotización

Para una cotización más rápida, envía un breve resumen técnico en lugar de solo solicitar el precio. Una versión útil se ve así:

  • Producto: Actuador Lineal IP80 24V
  • Voltage: required supply and confirmation of the selected motor/controller configuration
  • Carga: carga de movimiento objetivo y dirección
  • Stroke: exact required travel plus retracted/extended dimensions and mounting clearance
  • Speed: required speed under the actual load, with the selected gearing/configuration confirmed
  • Protection: required IP target plus current configuration-specific enclosure/test documentation
  • Entorno: interior, exterior protegido, polvo, salpicaduras, rango de temperatura
  • Control: controlador, interruptor, control remoto o placa del sistema
  • Cantidad: cantidad de muestra y rango de pedido esperado
  • Documents: current datasheet/drawing if available, test requirements, and applicable configuration-specific compliance records

Este tipo de resumen brinda al proveedor suficiente información para responder con algo útil. También reduce la posibilidad de aprobar una muestra que se vea bien en el banco pero falle una vez montada en el producto terminado.

Por qué este producto funciona bien

The IP80 is a compact OEM actuator platform whose final suitability depends on the selected voltage, rated working load, stroke and installation length, gearing and load-dependent speed, enclosure protection, noise target, mounting geometry, duty cycle, controller interface, environment, and required documentation. Confirm those items on the selected build before production approval.

Enlaces internos utilizados

Personalización de OEM y marca privada

ActuLift apoya la personalización de extremo a extremo, desde el diseño estructural y los parámetros de recorrido hasta la marca y los acabados de la carcasa, ayudándote a construir una potente identidad de marca.

Respuesta rápida y prototipado

Entendemos la importancia de la rapidez en la adquisición B2B, utilizando flujos de trabajo de producción optimizados para asegurar respuestas eficientes desde el desarrollo de muestras hasta la entrega a granel.

Quality Documentation & Traceability

Quality and traceability requirements vary by project. Ask ActuLift for the applicable inspection records, product specifications, drawings and available compliance documentation for the selected model and order.