IP3000L Linear Actuator | OEM Configuration

IP3000L linear actuator for OEM motion systems

The IP3000L is a configurable linear actuator platform for B2B/OEM motion projects. It should be specified from the actual application requirements rather than from a single catalog number.

For system planning, define the electrical supply, required load, travel, movement time, mounting geometry, duty cycle, feedback method and environmental exposure together. Related ActuLift categories include actionneurs linéaires 12V, actionneurs linéaires 24V, control boxes and controllers et Solutions OEM/ODM sur mesure.

Configuration points to confirm

Load, speed and stroke must be evaluated together

Linear actuator force, travel speed, stroke, mounting angle and duty cycle are interdependent. A maximum force value or maximum speed value should not be treated as a universal capability across every configuration.

For quotation, provide the real push/pull load, desired movement time, stroke, installation angle and expected cycle pattern. Ask for the performance point that matches that requirement and, where it matters, the supporting test data.

Feedback and controller options are configuration-specific

Do not assume that Hall feedback, closed-loop control, built-in limit switches or a particular controller is included in every IP3000L order. If the application needs position feedback, synchronized movement or controller-based monitoring, define it in the inquiry and request the matching actuator/controller documentation.

Buyers can also review ActuLift’s actionneurs avec retour d'information / contrôleur category when feedback is a project requirement.

Environmental and compliance boundaries

The current evidence set does not include an independent ingress-protection test report, acoustic report, temperature test, material certificate or CE/RoHS document for this product configuration. Do not treat previously published IP, noise, temperature, material or compliance statements as verified specifications without matching documentation.

If the installation involves moisture, cleaning, outdoor exposure or other demanding conditions, define the exposure and request the applicable test evidence. For sealed actuator selection, compare the requirement with ActuLift’s actionneurs linéaires étanches category rather than inferring waterproof performance from this page.

What OEM buyers should send for quotation

• Required DC supply and controller interface
• Push/pull load and load direction
• Target stroke and installation envelope
• Target travel time or speed under load
• Duty cycle and expected operating frequency
• Front/rear mounting and bracket geometry
• Feedback or synchronization requirement
• Cable, connector and exit-direction requirements
• Environmental exposure and required enclosure rating
• Required test, material or compliance documentation

Evidence boundary

The current IP3000L media set contains product images but no independent drawing, datasheet, load/speed test report, acoustic report, ingress-protection report, material certificate or compliance certificate. Exact electrical, mechanical, performance, environmental and compliance claims therefore require confirmation from the approved project documentation before production.