IP70 Micro Linear Actuator Manufacturer | OEM Configuration Support

IP70 micro linear actuator for compact OEM motion systems

IP70 is an ActuLift micro linear actuator model intended for compact OEM motion projects. It can be evaluated for equipment panels, smart furniture modules, inspection fixtures, instrument adjustment, light-duty automation and other layouts where actuator envelope and integration details need to be controlled during sample approval.

The current catalog places this model in ActuLift’s 12V and 24V actuator ranges. Load, speed, stroke, control method, feedback, acoustic performance and electrical limits are configuration-specific engineering checks and should be confirmed against the selected drawing, quotation or test data before production.

For buyers comparing small actuator families, this model belongs close to ActuLift’s Aktuator Linier Mikro & Mini category. You can also review the Aktuator Linier 12V dan Aktuator Linier 24V ranges when defining the project power architecture.

Configuration points to confirm

Built for compact OEM integration

The IP70 model is relevant when installation space is tight and the actuator must be selected as part of a complete mechanism rather than by model name alone. If acoustic performance matters, define the measurement condition and request test data tied to the selected voltage, load, stroke and mounting arrangement.

The same rule applies to speed and force. Do not treat a single catalog number as a universal production guarantee. Confirm the rated operating point, duty cycle, side-load limits, mounting geometry and controller settings for the actual mechanism before approving a sample.

For control planning, pair the actuator with a suitable driver or controller from ActuLift’s Kotak Kontrol & Pengendali range. If the project needs position control, multi-actuator logic or a more complete system, lock the control interface and feedback requirements during engineering review.

IP70 model designation and ingress-protection verification

On this product page, IP70 should be treated as the model designation, not as a verified IEC 60529 enclosure rating. IEC 60529 uses a first characteristic numeral from 0 to 6 for protection against solid foreign objects, so the model name must not be converted into a dust-protection claim without a supporting test or report.

For projects exposed to dust, splash, washdown, outdoor conditions or high humidity, request the exact enclosure rating, test basis, cable-exit details and installation conditions for the selected configuration. You can also compare ActuLift’s Aktuator Linier Tahan Air category, but the environmental requirement should be verified independently for the chosen product.

Confirm stroke and installation dimensions before sample approval

The current evidence set for this listing does not include an independent IP70 datasheet or drawing that verifies a universal stroke range. Treat stroke as configuration-specific until the selected value, retracted length and extended length are confirmed on the project drawing or quotation.

Before sample production, confirm these items with engineering:

• Required stroke, retracted length and extended length
• Static and moving load in the real mechanism
• Mounting hole style and bracket position
• Cable exit direction and cable length
• Voltage, current limit and control method
• Duty cycle and expected operating temperature
• Feedback option and wiring, if required
• Whether side load is controlled through guides or linkage design

For physical mounting, review the bracket position during drawing approval. A compact actuator still needs a clean load path, and the linkage geometry should be verified together with the actuator selection.

Procurement notes for OEM and wholesale orders

For wholesale buyers, quote the IP70 by complete configuration rather than model name alone. The buying brief should include voltage, stroke, load, speed target, acoustic requirement, cable length, connector choice, feedback requirement, controller plan, environmental requirement, documentation request, packaging needs and annual forecast.

Do not rely on this product page alone for CE, RoHS, ISO 9001 or other compliance conclusions. Request the current declaration, report or certificate that applies to the selected product, supplier process or order, together with the approved drawing and sample inspection record.

FAQ

Apa kapasitas beban maksimum?

A rated static and dynamic load is not independently verified by a product datasheet in the current evidence set for this listing. Ask ActuLift to confirm the selected configuration’s load limits and test the actuator in the actual mechanism before production approval.

Does the IP70 Micro Linear Actuator support both 12V and 24V?

The product is currently cataloged in both ActuLift’s 12V and 24V actuator ranges. Confirm the final voltage, current limit, connector and wiring for the selected configuration before ordering samples.

Can speed be controlled with PWM?

PWM compatibility is not independently verified for this model in the current evidence set. Confirm the recommended driver, control method, current limit, wiring and thermal limits before locking the control design.

Is IP70 waterproof?

Do not interpret the IP70 model name as a waterproof or dust-protection rating. Request the exact IEC 60529 or other enclosure rating, supporting report and installation conditions for the selected configuration if environmental protection is required.

What travel lengths are available?

A universal IP70 stroke range is not verified by an independent product document in the current evidence set. Provide the required stroke and installation envelope, then confirm the selected dimensions on the drawing or quotation before sample production.

What documents should buyers request?

For OEM purchasing, request the selected product specification, approved drawing, wiring guide, applicable compliance documents, material information, sample inspection record and any actuator-specific test data tied to the chosen voltage, stroke, load, speed, feedback and environmental requirement.

How to evaluate IP70 for an OEM project

IP70 can be evaluated as a compact actuator candidate once the project team locks the actual voltage, stroke, load, speed, feedback, environmental protection, acoustic target and documentation requirements. Treat those values as configuration-specific engineering confirmation points rather than universal fixed specifications.

Tautan internal yang digunakan

• Aktuator Linier Mikro & Mini
• Aktuator Linier 12V
• Aktuator Linier 24V
• Kotak Kontrol & Pengendali
• Aktuator Linier Tahan Air