U-Type Linear Actuator Mount Wholesale | OEM Pivot Bracket

U-Type Linear Actuator Mount for OEM pivot-point installation

The U-Type Linear Actuator Mount is a mechanical mounting accessory for DC linear actuator systems. It gives the actuator a secure pivot point, which matters when the actuator has to extend and retract through a changing angle instead of pushing in a perfectly fixed straight line.

For OEM buyers, this is the kind of small part that can decide whether a prototype feels clean or awkward. The actuator may have the right force, stroke, voltage, and controller. If the mount does not match the pin point, frame material, and motion path, the assembly can still bind, flex, or send side load into the actuator rod.

ActuLift groups this U-shaped mount with multiple actuator applications, but mechanical fit should be confirmed from the selected actuator and bracket drawings rather than inferred from a family name alone. Before sample approval, confirm the clevis or pin interface, hole spacing, bracket width, fastener size, pivot angle, clearance, and which selection or CAD files are available for the exact configuration. For teams sourcing Solusi OEM/ODM Kustom as part of a full actuator package, those files are worth requesting before sample approval.

Spesifikasi produk

Why this mount matters in actuator assemblies

A U-type mount is not an electrical upgrade. It does not make the actuator faster. It does not change the motor voltage. Its job is more basic and, in many builds, more unforgiving: it has to hold the actuator in the right position while allowing the end connection to pivot.

That pivot matters in lift lids, access panels, adjustable furniture, medical equipment frames, industrial hatches, mobile machinery, cabinet lifts, and custom linkage systems. As the actuator moves, the connected part often rotates through an arc. A U-type clevis-style mount gives the actuator room to follow that motion instead of fighting it.

Before a purchase order moves forward, buyers should check:

If your project is still choosing the actuator itself, compare the mount with the selected aktuator linier 12V, aktuator linier 24V, or higher-voltage DC actuator package before locking the bracket drawing.

Mechanical compatibility across actuator systems

Because the mount is mechanical, actuator voltage does not establish compatibility. A 12V, 24V, or 48V actuator system may use this style of mount only when the physical interface, bracket geometry, pin or hole dimensions, fastener layout, clearance, and load path are verified for the selected actuator.

This distinction helps buyers avoid a common sourcing mistake. Voltage tells you about the actuator and controller package. It does not tell you whether the bracket fits the clevis, whether the pin has the right diameter, or whether the frame has enough strength. For that, you still need a drawing.

Do not assume the mount’s load capability automatically matches the actuator rating. The bracket geometry and material, pin and fasteners, mounting surface, force direction, pivot angle, and duty pattern all affect the assembly. Confirm the load case for the exact bracket and actuator combination before approval.

For higher-force builds, buyers may want to review aktuator linier berkinerja tinggi and confirm the matching mount in the same quotation thread. For controlled or synchronized systems, pair the mechanical mount discussion with aktuator dengan umpan balik/pengontrol, especially if the actuator position has to be monitored.

Travel clearance, coating, and environmental fit

The mount has no independent stroke or travel rating. What matters is whether the bracket and pivot geometry remain clear through the selected actuator’s full extension and retraction. Confirm the drawing, installation length, pivot angle, and surrounding structure for the actual assembly.

For sample approval, ask the supplier to confirm retracted length, extended length, pivot angle, and bracket clearance for the chosen actuator. A bracket can look fine when the actuator is closed and still create problems near full extension. Drawings and CAD files catch those problems early.

Do not present the passive bracket itself as IP65 without a documented test basis that actually covers the relevant assembly. For sourcing, specify the required material, surface finish or coating, corrosion exposure, cleaning conditions, and outdoor or indoor environment, then confirm the selected finish against those requirements.

No bracket operating-temperature range is assumed from the current evidence. Confirm the required operating and storage temperatures against the selected material, coating, fasteners, lubrication where applicable, actuator, cable, controller, and the rest of the assembly.

For projects that need moisture-resistant actuator categories from the start, buyers can also compare aktuator linier tahan air before choosing the final actuator and bracket combination.

What OEM buyers should confirm before quotation

Start with the actuator model. Then ask for the bracket drawing. That order saves time. If the buyer sends only “U-type mount for 24V actuator,” the supplier still has to ask about the actuator family, stroke, pin, hole spacing, and load case.

For a clean quotation, send these details:

The mount has no independent acoustic performance rating. It has no motor, gear train, or speed profile of its own. Noise usually comes from the actuator, frame vibration, loose pins, poor alignment, or hard stops in the larger mechanism. A snug, correctly aligned mount helps keep the assembly clean, but it should not be sold as an active noise-control feature.

Untuk perencanaan sistem yang lengkap, pemasangan ini harus dicantumkan dalam file sumber yang sama dengan aktuator, metode kontrol yang dipilih, permintaan pelapisan, paket gambar, dan dokumen kepatuhan.

Catatan kepatuhan dan pengadaan

Do not assume ISO 9001, CE, or RoHS applies to this bracket from a generic product brief alone. For procurement, request the current documents that actually cover the supplier, material or coating, and ordered configuration where those records are relevant.

Treat compliance as a document-verification step rather than a product-performance claim. Confirm which records apply to the passive mount itself, which apply only to the actuator or controller package, and which relate to the supplier’s quality system before using them in a customer or regulatory file.

Untuk pesanan dalam jumlah besar, minta set dokumen yang sesuai dengan pemasangan aktuator yang tepat, pelapisan, model aktuator, sistem voltase, dan paket pengendali. Langkah kecil itu menjaga file pengadaan tetap bersih dan membantu tim kualitas menghindari pengejaran dokumen setelah pengiriman sudah berlangsung.

Braket Aktuator Dasar Datar Lengan Geser – Finishing Permukaan / Kompatibilitas / Kustomisasi OEM

The U-Type Linear Actuator Mount is intended as a mechanical pivot-mount accessory for OEM actuator assemblies. Final suitability depends on the selected actuator interface, bracket geometry, pin and fasteners, load path, full-motion clearance, material or coating, environmental conditions, and the documentation required for the ordered configuration.

Tautan internal yang digunakan

1. Solusi OEM/ODM Kustom
2. aktuator linier 12V
3. aktuator linier 24V
4. aktuator linier berkinerja tinggi
5. aktuator dengan umpan balik/pengontrol
6. aktuator linier tahan air