IPT1100 Lifting Column | OEM Configuration

IPT1100 lifting column for OEM equipment

IPT1100 is a configurable lifting-column platform for OEM equipment, furniture, workstations and custom vertical-motion systems. Final suitability depends on the selected electrical and mechanical configuration, required load, travel, movement speed, mounting geometry, controller, synchronization requirements, duty cycle and operating environment.

For system planning, compare ActuLift คอลัมน์ยกไฟฟ้า, คอลัมน์การยกแบบยืดไสลด์ และ industrial and mobile column lifts before locking the column architecture.

Configuration data to confirm before quotation

• Required supply voltage and controller architecture.
• Required axial and dynamic load in the real mechanism.
• Required travel, retracted height and extended height.
• Required movement speed under the expected load.
• Column orientation, mounting geometry and frame support.
• Expected operating frequency and duty cycle.
• Feedback, synchronization, limit and safety-function requirements.
• Controller, handset, cable, connector and wiring requirements.
• Required environmental or ingress-protection level.
• Required drawings, test records and compliance documentation.

Load and mechanical integration

Lifting-column capacity should be confirmed from the complete load case rather than inferred from a generic catalog number. Provide the axial load, dynamic load, load center, mounting direction, frame support, off-center forces and expected safety factor before selecting the final IPT1100 configuration.

The surrounding frame should guide the motion and prevent unnecessary side loading or misalignment. Confirm column spacing, mounting holes, brackets and structural support during drawing review. Related hardware can be reviewed under เพื่อให้แน่ใจว่ามีการรวมทางกลที่ไม่ราบรื่น..

Travel and movement-speed selection

Required travel should be derived from the finished equipment geometry. Confirm retracted height, extended height, available installation space and the required vertical movement on an approved drawing rather than assuming one universal travel range.

Movement speed should be validated under the real working load with the selected controller and drive configuration. Sample testing should check lift time, current draw, vibration, end-of-travel behavior and mechanical interference.

Electrical, control and synchronization planning

Confirm the applicable supply specification, rated and peak current, controller capacity, cable length, connector type and wiring scheme for the selected IPT1100 build.

If the system uses multiple columns or requires position feedback, limit confirmation or synchronized movement, confirm the exact sensor, controller and synchronization method before approval. Related options can be reviewed under control boxes and controllers และ รีโมทคอนโทรลและแฮนด์เซ็ต.

Environmental and protection requirements

Environmental suitability depends on the exact column build, seals, cable exits, connectors, mounting orientation and surrounding equipment. If the project requires a specific ingress-protection level, cleaning method, temperature range, humidity limit or exposure condition, request the current supporting test basis or documentation for the ordered configuration.

Do not treat a model-family page as proof that one protection class or environmental rating applies unchanged to every configuration.

Noise, duty-cycle and lifecycle validation

For equipment used near people, define an acceptable sound target and test the complete system under load. Frame resonance, brackets, panels, guides, controller behavior and installation quality can materially change the sound of the finished equipment.

Duty cycle and service-life requirements should be matched to the actual ON/OFF pattern, load and ambient conditions. Request applicable validation data if the project has a defined continuous-operation, lifecycle or safety requirement.

Compliance and documentation

For export programs, regulated equipment or customer quality systems, request the documentation package for the exact IPT1100 configuration. Depending on the project, this may include dimensional drawings, electrical specifications, wiring information, inspection records, material information, environmental test evidence or available compliance declarations.

Do not treat generic page wording as proof that CE, RoHS, ISO 9001 or another certification applies as a product-performance guarantee to every configuration or finished machine.

OEM buyer checklist

• Confirm the exact IPT1100 configuration before sample approval.
• Confirm load case, travel, speed and mounting geometry from the real mechanism.
• Confirm supply, current, wiring, controller and handset compatibility.
• Confirm feedback or synchronization requirements where applicable.
• Confirm environmental/protection requirements with supporting documentation.
• Confirm duty-cycle and lifecycle requirements from the actual use case.
• Confirm the documentation package required before bulk approval.

Where IPT1100 fits

IPT1100 is best treated as a configurable lifting-column platform for OEM vertical-motion systems rather than a fixed universal specification. Use the product page to begin sourcing, then lock the electrical, mechanical, control, environmental and documentation requirements through drawings, samples and project-specific validation.