حامل مشغل الدفع ذو القاعدة المسطحة - إنهاء السطح / التوافق / تخصيص OEM

حامل مشغل الدفع ذو القاعدة المسطحة - إنهاء السطح / التوافق / تخصيص OEM

ال حامل مشغل القاعدة المسطحة is a passive mechanical mounting accessory for OEM linear-actuator assemblies. Final fit depends on the exact actuator interface, bracket drawing, hole pattern, fasteners, load path, mounting surface and installation clearance.

Material, thickness, dimensions, finish, actuator compatibility and allowable load must be confirmed against the selected drawing, quotation or supporting documentation before sample approval or bulk ordering.

اتصل بنا للحصول على عرض سعر ومعلومات حول هذا المنتج:

عادةً ما سنتواصل معك خلال 30 دقيقة
شارك

حامل مشغل الدفع ذو القاعدة المسطحة لبناءات تركيب OEM

The Push Rod Flat Base Actuator Bracket is a mechanical mounting accessory for electric linear-actuator assemblies. Final fit depends on the selected actuator interface, bracket drawing, mounting-hole geometry, fasteners, load path, mounting surface and full-motion clearance.

For B2B buyers, start with the exact drawing rather than a catalog dimension alone. Confirm overall length, hole diameter and spacing, bracket thickness, actuator interface and frame geometry for the selected bracket before the purchase order moves forward.

The current brief references formed carbon steel, a 4mm gauge, ASTM A36-equivalent wording, powder coating and zinc plating. Treat those as unverified catalog references until the selected bracket drawing, material record and finish specification confirm them. The current brief references IP1200, IP3000, IP800, IP40 and IP42 series applications. Confirm the exact actuator model, base interface, hole pattern, fasteners and clearance rather than assuming family-level compatibility. For teams sourcing الأقواس والتركيبات بالاقتران مع المحركات، فإنه يندمج بشكل طبيعي ضمن مكونات الفوترة الكاملة للمحركات.

مواصفات المنتج

المواصفاتتفاصيل
اسم المنتجحامل الزر السطحي للزعانف
التركيب الماديConfirm material grade and thickness on the selected drawing or material record.
Gauge الهيكليCurrent brief references 4mm / ASTM A36-equivalent wording; confirm against the selected drawing and material documentation.
نمط ثقب التركيبCurrent brief references 4 x Ø6mm / 84mm spacing; confirm the exact hole pattern on the selected drawing.
الطول الكليCurrent brief references 98mm; confirm the exact overall length on the selected drawing.
تشطيب السطحConfirm available finish/coating or plating options for the selected order.
دعم الحمولةDo not infer load support from actuator family alone; confirm allowable bracket/assembly load for the actual geometry and load path.
التوافقCurrent brief references IP1200, IP800, IP40 and IP42; confirm exact actuator fit on the selected drawings.
ملاحظة توافق إضافيةCurrent brief also references IP3000 variants; verify the exact actuator interface, hole spacing and clearance before approval.
ISO 9001 المصنعةRequest applicable supplier quality-system and order-specific material/finish documentation where required.
سمات التغيير 1Surface Finish: confirm available coating/plating options for the selected order
سمات التغيير 2Compatibility: confirm exact actuator model and bracket drawing
سمات التغيير 3OEM system requirement: Hall/feedback belongs to the actuator/control system, not the passive bracket; confirm separately

التشطيب، والتوافق، وخيارات OEM

If a particular coating, plating or color is required, confirm which finish is actually available for the selected order and specify appearance, corrosion exposure and coating requirements before sample approval. Do not infer corrosion performance from finish terminology alone.

Compatibility should be selected by actuator series, not by guesswork. The current brief references IP1200, IP3000, IP800, IP40 and IP42 projects, but fit must be verified against the exact actuator and bracket drawings. If you are building around مشغلات خطية عالية الأداء, the IP3000 compatibility option is the important one to confirm early. Do not treat an IP3000 family reference as proof of fit or load capacity. Confirm the exact actuator model, mounting interface, load direction, fasteners, bracket geometry and clearance.

The bracket is a passive mechanical component and does not itself provide Hall feedback. If the OEM system requires Hall sensors or other position feedback, specify that requirement on the actuator/controller package separately. If your project needs position feedback, synchronized movement, or controller-based travel logic, pair the bracket discussion with محركات الدفع مع التغذية المرتدة / التحكم والمناسب control boxes and controllers.

ما يجب على المشترين تأكيده قبل الطلب

Start with the drawing. The current brief references 98mm overall length and a 4 x Ø6mm pattern with 84mm spacing, but those dimensions should not be released as production dimensions without the selected drawing. If the frame already has fixed holes, verify the exact bracket dimensions before ordering samples.

Next, check the load path. Allowable bracket and assembly load depend on bracket geometry and material, fasteners, mounting surface, force direction, pivot or alignment conditions and the equipment frame. Confirm the actual load case rather than inheriting a load assumption from the actuator series.

ثم تحقق من حزمة المحرك. إذا كنت تقوم بالتوريد محركات خطية 12 فولت أو محركات خطية 24 فولت, يجب أن يتطابق الحامل مع السلسلة الميكانيكية ونمط التركيب. الجهد وحده لا يحدد ملاءمة الحامل. المسار العملي للطلب هو نموذج المحرك أولاً، وتوافق الحامل ثانياً، واللمسات النهائية وخيارات OEM ثالثاً.

ملاحظات الشراء للمشترين بالجملة وOEM

This is a small part, but a mismatch in hole spacing, plate thickness, actuator interface, finish or load path can still cause rework. For sample orders, request the selected actuator model, bracket drawing, material/finish requirements and any actuator-side feedback requirement in the same quotation thread.

بالنسبة للطلبات الكبيرة، حافظ على أسماء التباين نظيفة في ملف الشراء:

الخاصيةالقيم
طلاء مسحوق أسود / طلاء زنكConfirm available finish/coating or plating options for the selected order.
التوافقConfirm exact actuator model and bracket drawing
تخصيص OEM (اختياري)Bracket: passive mechanical part; confirm any Hall/feedback requirement on the actuator/control system separately

تساعد هذه الهيكلية المورد في اقتباس الحامل كجزء من مجموعة محركات كاملة بدلاً من اعتبارها قطعة معدنية معزولة. كما أنها تعطي فريق التجميع لديك ملاحظات استلام أوضح عند وصول الحوامل، والمحركات، ووحدات التحكم، والكابلات معًا.

لماذا يعمل هذا المنتج بشكل جيد

The Push Rod Flat Base Actuator Bracket is an OEM mounting accessory whose final suitability depends on the selected actuator interface, approved bracket drawing, material and finish, hole pattern, fasteners, load path, mounting surface and any documentation required for the ordered configuration.

الروابط الداخلية المستخدمة

  1. الأقواس والتركيبات
  2. مشغلات خطية عالية الأداء
  3. محركات الدفع مع التغذية المرتدة / التحكم
  4. control boxes and controllers
  5. محركات خطية 12 فولت
  6. محركات خطية 24 فولت

 

التخصيص للعلامة التجارية الخاصة

تدعم أكتوليفت التخصيص من البداية إلى النهاية، من التصميم الهيكلي ومعلمات الشوط إلى العلامة التجارية واللمسات النهائية للحالات، مما يساعدك على بناء هوية علامة تجارية قوية.

استجابة سريعة ونماذج أولية

نفهم أهمية السرعة في الشراء بين الشركات، باستخدام تدفقات إنتاج محسّنة لضمان استجابة فعالة من تطوير العينات إلى التسليم بالجملة.

Quality Documentation & Traceability

Quality and traceability requirements vary by project. Ask ActuLift for the applicable inspection records, product specifications, drawings and available compliance documentation for the selected model and order.