


ค้นหาความสามารถ OEM/ODM ที่ครอบคลุมของ ActuLift สำหรับแอคทูเอเตอร์เชิงเส้นที่กำหนดเอง จากความยาวการเดินทางที่มีความแม่นยำ 10-1000 มม. ถึงตัวเลือกการติดตั้งและสายเคเบิลที่ปรับแต่ง เรียนรู้ว่าทีมวิศวกรรมของเราปรับเปลี่ยนแนวคิดการเคลื่อนไหวที่ซับซ้อนให้กลายเป็นโซลูชันอุตสาหกรรมที่พร้อมจัดส่งได้อย่างไร
Use this guide to define an OEM/ODM linear-motion request around load, stroke, speed, duty cycle, mounting, cable routing, controls, environment and documentation before a configuration-specific review.
OEM projects can differ in load, travel, mounting geometry, controls, cable routing, environment and documentation. The useful starting point is to define those requirements, then compare them with the closest existing actuator or lifting-column platform.
ActuLift’s OEM/ODM project workflow starts with requirement review. Dimensions, interfaces, controls or other changes are evaluated against the selected product family; feasibility, performance, documentation, tooling, validation and commercial terms must be confirmed for the specific project before approval.
แอคทูเอเตอร์มาตรฐานมาพร้อมกับความยาวการเดินทางที่คงที่ การกำหนดค่าการติดตั้งที่กำหนดไว้ล่วงหน้า และความยาวสายเคเบิลที่ตั้งไว้ล่วงหน้า แม้ว่าจะสะดวก แต่ตัวเลือกมาตรฐานที่กำหนดไว้สร้างความท้าทายในระหว่างการรวมตัวบ่อยครั้ง:
วิธีการที่ปรับแต่งได้ของ ActuLift ช่วยขจัดจุดเสียดทานเหล่านี้โดยการจัดส่งแอคทูเอเตอร์ที่ออกแบบมาโดยเฉพาะสำหรับการใช้งานของคุณตั้งแต่เริ่มต้น
ความยาวการเดินทางกำหนดว่าคุณสามารถขยายและยืดแอคทูเอเตอร์ได้ไกลแค่ไหน ทำให้มันเป็นหนึ่งในสเปคที่สำคัญที่สุดสำหรับการใช้งานใด ๆ

Stroke availability is product-family and configuration dependent. Define the required travel, retracted and extended length, mounting geometry, load, speed and stability constraints, then confirm the feasible range for the selected platform.
| Stroke / package input | What to define |
|---|---|
| Required travel | Minimum and maximum motion needed by the mechanism |
| Retracted / extended length | Available installation envelope and end-clearance limits |
| Load and speed | Required working point through the intended travel |
| Geometry / stability | Mounting points, side-load risk, critical-speed or column-stability constraints |
เมื่อคุณระบุความต้องการการเดินทางที่แน่นอนของคุณ คุณจะได้รับข้อได้เปรียบหลายประการ:
Do not assume a particular stroke or positioning capability from this article. Submit the required travel and package constraints, then confirm what the selected actuator family can support.
การกำหนดค่าการติดตั้งกำหนดว่าแอคทูเอเตอร์เชื่อมต่อกับอุปกรณ์ของคุณอย่างไร หน้าสัมผัสการติดตั้งที่ไม่เข้ากันสร้างความท้าทายในการติดตั้ง ต้องการอุปกรณ์เสริมที่กำหนดเองหรือจำเป็นต้องมีการออกแบบใหม่ ซึ่งทั้งหมดนี้ทำให้เพิ่มเวลาและค่าใช้จ่ายในโครงการของคุณ

For OEM review, define the mounting interface from the mechanism drawing, including thread or pin standard, interface dimensions, load direction, articulation and tolerance requirements:
Mounting inputs to define:
Interface evidence to provide:
Project-specific mounting changes may be reviewed when the standard interface does not fit the mechanism. Treat the following as design inputs, not default available options:
Submit a controlled interface drawing for engineering review. Any project-specific interface should be confirmed by drawing revision, sample fit check and the agreed acceptance criteria before production.
ความยาวของสายอาจดูเหมือนเป็นเรื่องเล็กน้อย แต่การขนาดที่ไม่ถูกต้องสามารถสร้างความท้าทายในการติดตั้งที่สำคัญ สายที่สั้นเกินไปต้องการการต่อหรือการเดินสายใหม่; สายที่ยาวเกินไปสร้างความยุ่งเหยิง และทำให้ดูไม่เป็นอาชีพ

Cable and connector requirements should be defined as project inputs and confirmed for the selected actuator/controller configuration:
A configuration-specific cable plan can improve integration when it is designed and validated with the finished equipment:
Submit the cable/connector requirement with the mechanism and controller information; availability, tooling, pinout, sealing and validation requirements must be confirmed before it becomes an approved configuration.
ActuLift’s โซลูชัน OEM/ODM ที่กำหนดเอง ขยายไปไกลกว่าการเดินทาง, การติดตั้ง, และการกำหนดสาย สายงานการปรับแต่งเพิ่มเติมได้แก่:
Define the complete moving and holding load case, linkage geometry, duty cycle, speed and safety margin, then confirm the rated working point of the selected product family. Do not infer a universal custom-force range from this article.
Define the required speed at the expected load together with stroke, duty cycle, controller behavior and stopping requirements. Confirm the achievable working point for the selected configuration rather than assuming a custom speed is always available.
ส่งความต้องการของคุณ—ความยาวการเดินทาง, การกำหนดมุมการติดตั้ง, ความยาวสาย, แรงดัน, แรง, และข้อกำหนดด้านสภาพแวดล้อม ทีมวิศวกรรมของ ActuLift จะตรวจสอบแต่ละพารามิเตอร์เพื่อความเหมาะสมและโอกาสในการปรับปรุง
การสื่อสารโดยตรงกับผู้เชี่ยวชาญด้านเทคนิคของ ActuLift จะช่วยให้แน่ใจว่าการพิจารณาทั้งหมดได้รับการแก้ไข คำแนะนำสำหรับการปรับปรุงจะถูกเสนอขึ้นอยู่กับข้อกำหนดของแอปพลิเคชัน
Where a sample or prototype stage is agreed, use it to verify fit, function and the defined performance criteria. Sampling supports validation but does not replace the buyer’s finished-system testing, qualification or regulatory responsibilities.

After the selected configuration, drawing revision, quality requirements, documentation package and commercial terms are agreed, production can proceed under the approved order. The applicable inspections, records and supplied documentation must be defined for that project rather than assumed from this article.
OEM/ODM requests can come from different equipment sectors. The application label does not by itself establish actuator suitability; evaluate the selected แอคทูเอเตอร์เชิงเส้น or lifting-column platform against the actual requirements:
For this sourcing workflow, OEM generally starts from buyer-defined drawings or specifications, while ODM may involve more supplier-side engineering input from functional requirements. In either case, freeze the selected platform, controlled drawing, configuration, validation plan and commercial/documentation scope before production.
You can submit a target ingress-protection requirement, but availability is product- and configuration-dependent. Define the actual dust/water exposure, mounting, cable/connector interfaces and cleaning conditions, then request configuration-specific test or declaration evidence before approval.
There is no universal prototype lead time. Timing depends on the selected base platform, engineering changes, drawings, tooling, components, sample quantity, test scope and documentation. Confirm the current project schedule in the quotation or project plan.
Feedback or control requirements such as Hall sensing, potentiometer, limit switching or other interfaces can be submitted for review, but availability and electrical details are configuration-specific. Synchronization or position-control performance must be validated with the selected actuator, controller, wiring and mechanism.
OEM/ODM review should begin with a complete requirement set and the closest existing product platform. Any requested change to stroke, mounting, cable, controls, environment or other interfaces should be confirmed through the project-specific engineering and validation process.
Start from the relevant แอคทูเอเตอร์เชิงเส้น, lifting-column, control or mounting family, then document which dimensions, interfaces, controls or environmental requirements need configuration-specific review.
Ready to define an OEM/ODM request? Send the load, stroke, speed, duty cycle, voltage, controls/feedback, mounting drawing, cable/connector requirements, environment, documentation needs and target quantity for configuration review.
การเลือกแอกทูเอเตอร์ที่เหมาะสม แอกทูเอเตอร์ไฟฟ้าเชิงเส้น หรือ เสานี้ เป็นสิ่งสำคัญสำหรับประสิทธิภาพของโครงการของคุณ ในฐานะที่เป็นผู้ผลิต การควบคุมการเคลื่อนไหวและการอัตโนมัติ, วิศวกรของเราช่วยคุณปรับแต่งความจุของโหลด ความยาวของสโตรค และการจัดอันดับ IP ตามแอพพลิเคชั่นเฉพาะของคุณ แบ่งปันข้อกำหนดทางเทคนิคของคุณเพื่อให้ได้โซลูชันที่เหมาะสม